PROJECT*MJP 2500W PRINTER
Project*MJP 2500w Printer
| # | Specification | Details |
|---|---|---|
| 1 | Dimensions (WxDxH) |
3D Printer Crated: 1397 x 927 x 1314 mm (55 x 36.5 x 51.7 in) 3D Printer Uncrated: 1120 x 740 x 1070 mm (44.1 x 29.1 x 42.1 in) |
| 2 | Weight |
3D Printer Crated: 325 kg (716 lb) 3D Printer Uncrated: 211 kg (465 lb) |
| 3 | Electrical |
100-127 VAC, 50/60 Hz, single-phase, 15A 200-240 VAC, 50 Hz, single-phase, 10A Single C14 receptacle |
| 4 | Operating Temperature Range | 18-28°C (64-82°F), reduced print speed at > 25°C (77°F) |
| 5 | Operating Humidity | 30-70% relative humidity |
| 6 | Noise | < 65 dBA estimated (at medium fan setting) |
| 7 | Certifications | CE |
Printing Specifications
| # | Specification | Details |
|---|---|---|
| 1 | Net Build Volume (xyz) | 294 x 211 x 144 mm (11.6 x 8.3 x 5.6 in) |
| 2 | Accuracy (typical) |
±0.0508 mm/25.4 mm (±0.002 in/in) of part dimension typical for any single printer ±0.1016 mm/25.4 mm (±0.004 in/in) of part dimension across printer population |
| Printing Modes | XHD | ZHD |
|---|---|---|
| Resolution, (DPI) | 1200 x 1200 x 1600 | 1200 x 1200 x 3200 |
| Layer Thickness (µm) | 16 | 8 |
| Single Lane Build Productivity cm³/hr (in³/hr) |
147 (9) | 75 (4.6) |
| Time for 1 in (2.54 cm) height, hr | 4 | 8 |
| Two Lane Build Productivity cm³/hr (in³/hr) |
141 (8.6) | 72 (4.4) |
| Time for 1 in (2.54 cm) height, hr | 8 | 16 |
| Three Lane Build Productivity cm³/hr (in³/hr) |
134 (8.2) | 69 (4.2) |
| Time for 1 in (2.54 cm) height, hr | 12 | 24 |